Micron Electronics NetFRAME LV2000 Guide de l'utilisateur télécharger pdf (Page 32)

2-12 Micron Electronics, Inc.

Micron NetFRAME LV2000 Server System User’s Guide

Installing Add-On Peripherals

The NetFRAME LV2000 accommodates ISA and PCI Local Bus cards. Extra

SDRAM can also be added to the system board. The following describes how

to install the PCI card and SDRAM memory.

PCI Local Bus Card

PCI Local Bus slots accommodate most PCI-approved Local Bus cards. To install

a PCI Local Bus card:

1. Power OFF the computer system.

2. Locate an unused PCI slot on the system board.

3. Insert the card with the bottom edge level. Never insert the card

at an angle.

4. Holding the card at the center of the top edge, gently push straight

in. Do not force the card into place. If it does not fit, take it out

and try again.

5. Make sure the card is fully inserted.

6. Secure the card with a bracket screw.

Figure 2-5. Installing a PCI Local Bus Card

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 101 102

Pas de commentaire

Micron Electronics NetFRAME LV2000 Guide de l'utilisateur Page 32